1. When the cable tray is erected in parallel with various pipelines, the net distance shall meet the following requirements: 1. The cable tray is installed in parallel with the general process pipe (such as compressed air pipe) not less than 400 mm. 2. The cable reel and the corrosive liquid pipe should be installed in parallel at least 500 mm. 3. Cable reels should not be transported in parallel with corrosive liquids installed above or below corrosive gas pipelines. When unavoidable, it should not be less than 500 mm. And applied to the anti-corrosion board. 4. The cable tray is installed in parallel with the heat pipe. The heat pipe and the insulation layer are not less than 500 mm, and the heat insulation layer is not less than 1000 mm. 5, the cable tray should not be parallel to the upper heat pipe device, when the inevitable need is higher than the parallel installation of the heat pipe, not less than 1000 mm, measures should be taken for effective heat insulation. 2. When the cable tray crosses various pipelines, the net distance shall meet the following requirements: 1. It is not less than 300 mm with the general cable bridge cross process pipe. 2. The cable drum and corrosive liquid pipeline are lower than the cross or corrosive gas pipeline, not less than 500 mm. The length of the cable protection tray and cover plate should be not less than 2000 mm d for the intersection and stainless steel plate, because the pipe diameter (d ). 3, cable straddle bridges and heat pipes, heat pipes and insulation layers, not less than 500 mm, no insulation layer, should not be less than 1000 mm, and applications in the corner of the insulation board (such as asbestos board) cable protection tray and compartment The length of the hot plate should not be less than d 2000 mm. (d is the outer diameter of the heat pipe insulation)
PCD Drills used to drill through holes or blind holes in solid materials and to ream holes in existing holes. Commonly used drill bits mainly include twist drills, flat drills, center drills, deep hole drills and nest drills. Although reamer and boring drills cannot drill holes in solid materials, they are customarily classified as drill bits.
FEATURE:
1.Hardness PCD blanks more than 5000HV.
4.big quantity in stock for ordering
PCD carving tool
PCD drills
Flexible in order quantity:
Samples can be provided before mass production, and MOQ can be discussed accordingly.
PRODUCT DETAIL:
PRODUCTING PROGRESS:
PAYMENT AND DELIVERY:
PRODUCT EQUIPMENT :
ABOUT US :
We are specialize in manufacturing PCD diamond tools and Carbide tools. Our major product inclulde PCD Inserts , PCD Reamers , PCD End Mills , PCD Taps, Cabide Inserts,Carbide Drills, Carbide Reams, Taps etc.,
We also offered customized cutting tools per drawings, and provide package according to customer requirements. We manufacture a series range of cutting tools for machining of Cast iron, Aluminium alloy and Non-Ferros metal, it is widely used in all major sectors like Automobiles, Engineering, Aerospace, Aviation and 3C industry. Premium quality of raw material is used in the production and strict examination during processing with advanced equipment, so our client are satisfied with our reliable quality and on-time delivery.
Our best selling of cutting tools include PCD Inserts, PCD End Mill, PCD Ball Nose Mill, PCD Reamer, Carbide Taps , Carbide End Mill, Special Form Cutter and many more. For these years we have been made a large forward in the technologies of manufacturing cutting tools. With high quality on performance and price, our product sells well both on domestic and overseas market. And we will always focus on the quality and best service, to make long business relationship.
quanlity control:
We have dedicated team of quality control and precise equipment to keep good and stable performance for our products and processing services.
PCD Drill Bit, PCD Drills, Carbide Drill Bit, End Mill Bit OPT Cutting Tools Co., Ltd. , https://www.optdiamondtoolss.com
Our customers can depend on us for prompt, efficient response and quality products that attest to our expertise in engineering and manufacturing. As part of our scrupulous inspection procedure, we test 100% of our drills .375" and under for assembly integrity, leakage, and specified oil flow.
2. PCD Stone Milling cutters is maily used for High efficiency milling and depth character engraving on underside, grooving areas with good surface Roughness.
3.Top quality as world leading manufactuers, high abrasive resistance and with long service life.
