Smart Sweeper Robot Common Faults Solution

After the intelligent sweeping robot is used for a long time, some failures cannot be avoided. However, not all the malfunctions need to be repaired by someone else. The following Xiaobian will take stock of the handling of some minor glitches and we can solve it at home.

One, side brush does not turn

Side brush does not turn basically false faults, the probability of side brush motor problems is also very small, such as side brush motor problems there will be alarm sound.

Solution, steps:

1, first determine whether the machine is currently powered (by the machine's AUTO mode button next to the battery indicator light to determine), if it is red or orange, then the treasure is certainly no electricity, please charge. It is necessary to turn on the switch on the bottom of the treasure before charging. It is recommended that the customer is always on and does not need to be closed. If the switch at the bottom of the sweeping robot is off, it cannot be charged.

2. If the power indicator light next to the AUTO mode key is green, then determine if the return mode is excluded when returning to the charging stand. This should determine the side brush itself. include:

a, the side brush does not tighten

b. The screw turns too tight and the screw is broken

c, the screw turns too tight, the thin side of the side brush cracked

d. The problem of the side brush motor (can be judged by the rotation of the side brush) - When the sweeper is fully charged, remove the side brush, press the AUTO mode, turn the machine in reverse, press the outside of the wheel with your finger To see if the rotation axis of the roller brush and side brush can rotate normally. If you can turn, there is no problem with the side brush motor. If the roller brush can be rotated, the side brush shaft does not work properly and there is a problem with the brush motor over there.

Second, the host can not open the machine or not charge

The main reason why a machine cannot charge is that there is no charge, or it is not sufficient.

Solution, steps:

1, first determine the switch at the bottom of the machine is open, in the closed state of the charge, the tail of the switch will flash, but the electricity is not filled. Therefore, before charging, please make sure the switch on the bottom is turned on. It is recommended that the machine is always on and does not need to be turned off. If the switch at the bottom of the machine is off, the charger will not charge.

2. Make sure that your home is powered off while charging.

3. Whether the machine is separated from the charging stand by a little distance during charging, or is not completely in place.

4. After the machine is fully charged, whether the power supply of the charging stand is pulled off or not, and the power on the body is not turned off after the machine is unplugged, resulting in power loss.

5. Excluding the above method, it is recommended that the customer activates the battery. Activation method: Manually take the machine back for 3 minutes, take it back for a few seconds, repeat this 3 times, and finally allow the sweeping robot to charge for 12 hours. Then look at it for a few days.

Third, the machine alarm

The machine generally sounds an alarm, mainly for the following reasons: 1, no electricity, 2 roller brush, side brush, hair winding inside the drive wheel 3, the machine stuck in a dead end 4, the machine is indeed a problem.

Solution, steps:

1, first determine whether the machine has electricity, the power indicator light is red, if it is red, it is no electricity, the alarm sound is a reminder to return to charge.

2, to determine the use of time, if more than a few months, it is likely that there is a winding, check the side brush, the drive wheel is a hair winding, remove the roller brush to clean up.

3, whether the machine can not come out in a relatively small range, please manually intervene.

4. It is especially important to clean the roller brush (be sure to clean it down). To eliminate the above problems, the machine does have problems.

Fourth, the machine small-scale cleaning

Small-scale cleaning of the machine is generally a normal situation and needs to confirm the actual range of cleaning of the machine and the cleaning time.

Solution, steps:

1. Check how long the machine is working. If it is a few minutes or 10 minutes, it is basically normal.

2, confirm the range of machine cleaning, if it is in a living room or more than a dozen places to clean, is normal, it is recommended to use every day, familiar with the situation after the home, 7-10 days after a period of coverage will reach 95% or more .

3, please remove the Po dust box, wipe the dust inside the sensor clean, and the bottom of the machine under the sensor is also wiped clean.

Fifth, when the machine works, the noise becomes larger

The reason why the cleaning robot works louder may be that the side brush and the roller brush have foreign objects

Solution, steps:

1. After turning off the power switch, remove the dust box and clean the trash, and then put the bottom of the machine up

2, check and ensure that there is no blockage at the brush mouth

3, check and clean the roller brush (including the hair winding at both ends of the roller brush)

4, check and clean the side brush

Sixth, cleaning ability to vacuum

The reason for the decrease in the cleaning capacity of the vacuum cleaner may be that the filter dust accumulated in the dust box cannot be removed due to excessive accumulation of dust. Roller or winding at the drive wheel.

Solution, steps:

1. After turning off the power switch, remove the dust box

2. Whether the filter cotton in the dust box has accumulated too much dust, remove it in time and replace it

3, clean up the roller brush suction mouth without plugging

4, check the drive wheel for dirt or objects wrapped so that it can not work

The above content is the solution to the glitches of sweeping robots. Usually, when people encounter problems, they are eager to find after sales. In the end, it is not a big deal to spend a lot of money. After learning the above information, we can easily solve the small problems we find ourselves at home. Can not solve the problem after the sale is not too late.

related suggestion:

Article: How to buy smart sweeping robots? These five principles cannot be ignored

Recommended: FD Intelligent Sweeper Intelligent Sweeping Robot Dust Dust Drop Protection FD-3RSW(IC)