Analysis of the construction and application of a new type of intelligent lighting system

“tailor-made” energy efficient lighting system

The special environment of industrial production puts very high requirements on the working stability of the lighting system, and it is necessary to design the lighting system for the specific environment. Especially in the steel industry, the lamps are often operated in a high temperature environment, and the higher the position, the higher the temperature. Some workshops also have heavy dust and water mist. If the protection is not enough, it is easy to make the efficiency of the lamps drop very fast. Some areas of the plant also require the treatment of the surface of the steel sheet with acid with volatile components, which can cause corrosion in the lighting equipment. In addition, large- and medium-power metal halide lamps are widely used in industrial plants. The attenuation and life of lamps are also very important. Among the industrial users of Philips services, there is a large domestic steel company. The company originally used self-ballasted mercury lamps, incandescent lamps and mixed lights only for the convenience of maintenance and replacement of lamps. It is not only difficult to meet the stability requirements of industrial lighting, but also consumes large amounts of electricity and is inefficient, which has become a constraint to the development of enterprises. "Soft ribs."

After considering various environmental factors of the plant, Philips selected high-quality lamps with high protection capability, high temperature resistance and corrosion resistance for the steel company, and adopted a light source with relatively mild attenuation, which is more suitable for long-term opening in industrial plants. . In addition, considering that the steel industry not only needs general lighting of large-scale workshops, but also needs to install a large amount of local lighting in the operating parts and inspection parts of the equipment, energy saving of lighting has become the most direct way for enterprises to reduce consumption. Philips lighting designers found that the building has a lot of ventilation holes and lighting windows, which can be used in the natural light during the day. All the lamps are only turned on at night, which can reduce the power consumption to the maximum possible energy saving. Of course, the number of live lamps and switches in this way will be more, and there are certain requirements for the frequent switching performance of the lamps, and Philips' high-quality products can do just that. As a result, although the purchase cost of the lighting system has increased, the high-quality lighting, like excellent mechanical equipment, can reduce operating costs and maintenance costs, and the benefits will exceed the initial additional investment in a short period of time.

"Lights according to local conditions"

Making maintenance of the lighting system easier Throughout the scientific and energy-saving lighting concept in industrial lighting systems, careful and regular maintenance and maintenance of the luminaires is required, which will help to improve the effectiveness and service life of the lighting system. However, due to the structure of the workshop and workshop, the maintenance of the lighting system in the industrial field is much more complicated than the life lighting, and it is often necessary to adopt a special maintenance form according to the actual environmental conditions. For example, in the lighting system renovation project for the steel company, Philips adopted three lighting methods according to the specific characteristics of different plants. The maintenance of the lighting system is made easier while ensuring high quality lighting. The workshop involved in the project is a steel structure building with a height of 18-30 meters. It is obviously not feasible to directly repair the lamps through the top row frame. Therefore, in the workshop where the top of the road is not too far from the lower part of the frame, the luminaire is installed in the operable range of the top of the road, and the luminaire is maintained by the top of the road; in the most inconvenient maintenance position, the illuminating system is used. Maintenance; use of lift truck maintenance in workshops with convenient ground conditions, which can share one or several workshops. There is not much demand for the installation structure of the top lamps of the building, and the operation is convenient. In the lighting design of industrial lighting systems, Philips lighting often considers the layout and characteristics of each workshop, and adopts a variety of lighting methods to achieve simpler and more convenient maintenance of all lighting systems.

Today, as global energy is getting tighter, the energy saving of industrial lighting systems is the trend of the times. High-quality industrial lighting not only satisfies the extreme environment of industrial production, reduces energy consumption, but also provides a more comfortable visual environment that helps employees to increase their productivity, thereby increasing productivity, reducing errors, non-conforming products and accidents. Alleviate long-term work fatigue and ultimately add more value to the company.

Erase your drawing image with the press of a button.
This Electronic Writing Tablet is an environment-friendly learning and education tool both for students and teachers.
Write with the included plastic stylus or any other suitable instrument, even your fingernails can finish the writing task.

50000 times delete life time. Save papers and money. More important the LCD Writing Board no dust and no pollution, it's a helthy LCD Writing Pad for users.

Electronic Writing PadElectronic Writing Board

8.5 Inches LCD Writing Tablet

8.5 Inches LCD Writing Tablet,LCD Writing Boards,LCD Writing Tablet with Memory,Children Writing Tablet LCD

Shenzhen New Wonderful Technology Co., Ltd. , https://www.sznewwonderful.com