Energy saving 30% Nanchang road lighting will transform LED lamps

Energy saving 30% Nanchang road lighting will transform LED lamps On November 19th, Nanchang City Street Lamp Management Office stated that in order to speed up the energy-saving renovation of urban lighting facilities and cooperate with Nanchang's road network transformation and upgrading project, the LED street lamp renovation project of Nanchang Road Road Network is being fully implemented.

According to the introduction of LED street lamps that have been transformed in Nanchang, this road network LED street lamp renovation project mainly includes Gaoxinbei Avenue, Fuda Youdi, Nanjing West Road, Jinggangshan Avenue, Changnan Avenue, Jiefang West Road, and Jiefang East Road. The city's main road, the original use of high-pressure sodium lamp into LED lighting, power 90W, 120W and 160W several, the project cost is 1330 million, plans to replace the LED lamp 2454 sets.

LED lamps consume about 30% less electricity than previous lamps. The replacement of street lamps in some road sections has been completed, and the LED lamps have been tested for illuminance and other related parameters after the reconstruction. After the illuminance and luminous decay are completed, they are put into use. The entire LED street light renovation project is scheduled to be completed by the end of December.

The Description Of Flat Amplified TV Antenna

Innovative flat,razor-thin antenna design.
Flat Amplified TV Antenna It has high gain and low error rate Digital TV signal reception,and a significant signal enhancement in actual ues.Increase the reception of TV programs,and eliminate the pause the mosaic images.
Multi-directional design pulls in signals from all directions.
Fast and easy to set up - Unwrap,Plug it in and Scan channels.
IMPORTANT TIP BEFORE YOU BUY:You have to make sure your TV is Digital TV, the local signal is COVERED.You can put it on the wall,on the table or on the window(strongly recommended) and it will make you enjoy watching crystal clear digital & HD shows with many opportunities.


The Specification Of Flat Amplified TV Antenna

Features
1.Support 1080p.
2.50 miles range.
3.Multi-directional capability.
4.call out all "Free" channels.
5.Connector Type:F Male.
6.V.S.W.R.:<1.5
7.Working Frequency: 174~240MHz,470~862MHz.
8.Gain:25 dBi(with amplifier).


Picture show

Flat Amplified Tv AntennaFlat Amplified Tv Antenna



Flat TV Antenna

Flat Amplified TV Antenna,TV Antenna With Amplifier,Digital Flat TV Antenna,Flat TV Antenna

Shenzhen Yetnorson Technology Co., Ltd. , http://www.yetnorson.com