Fast thyristors (Inverter Thyristor)are used for higher frequency rectification. Inverter and inverter circuit appliances.
Rectifiers have many uses, but are often found serving as components of DC power supplies and high-voltage direct current power transmission systems. Rectification may serve in roles other than to generate direct current for use as a source of power. As noted, detectors of radio signals serve as rectifiers. In gas heating systems flame rectification is used to detect presence of a flame.
Inverter Thyristor Inverter Thyristor,Power Inverter Thyristor,Frequency Inverter Thyristor,Electronic Component Inverter Thyristor YANGZHOU POSITIONING TECH CO., LTD. , https://www.yzpst.com
As the front end of the production line, the silk making workshop became the starting point for cooperation between Hongta Group and Philips. The height of the workshop in the silk making workshop is generally 7.5 meters, while the height of the storage room and the vacuum resurgence zone is 10 meters. The clearance situation inside the factory building is relatively complicated, there are many large-scale equipments, and the upper pipelines are lined up, which requires careful design and calculation of the light distribution area and effects. The professional design team for Philips Lighting has developed a systematic green lighting solution according to the operation requirements of the silk-making workshop. After using the leading LED technology, only the wire-making workshop can save more than 200,000 yuan in annual electricity cost and reduce carbon dioxide emissions. The expected effect of more than 400 tons.
In the lighting design of the Hongta Silkmaking Workshop, Philips' latest generation LED high ceiling GreenPerform BY618/619 narrow beam lamp was used. The forward-looking patented form factor and three light distribution options, wide/narrow/high shelf light distribution for optimum ratio. With suitable illumination, the operating object is clearly visible. At the same time, the system efficiency is up to 100lm/W, which can replace 250W and 400W one-to-one, and the overall energy saving rate is 60%. In addition, it has an optimized structural design, IP65 protection level meets the safety requirements of the wire making workshop. The solution also uses an innovative LED module independent dimming system and intelligent DLPE intelligent dimming panel and DMBC110 coupler, which can intelligently control the adjustment of lighting according to different needs of different time periods, which can save the performance of the whole system to 75. %.
In addition, Philips also uses a high color rendering high ceiling luminaire as a matching combination. Its unique design and Philips light source achieve optimal light distribution, creating a clear, bright, high-quality lighting environment.
According to the relevant personnel of Philips, after the completion of the project, the two spinning workshops have achieved the expected lighting effect. The measured results of the illumination are close to 200 lux, and the illumination of the enhanced lighting section has reached more than 300 lux. It is worth mentioning that although the density of lamps in the enhanced lighting area has increased, the power of the lamps has dropped to 1/4 of the original, and the overall energy saving benefits have been achieved. 
Philips will build a "green factory" based on LED
Recently, Philips Lighting and Yunnan Hongta Group implemented LED-based “Green Factory†lighting upgrade in the silk-making workshop. Philips has proposed a multi-layered "green factory" concept that includes scientific energy management, lighting design and enterprise efficiency improvement, and employee work environment care, which can effectively control the lighting equipment purchase and operation costs.