In the past week, Hungary, Germany, France and Latvia have reported on a number of LED lighting products exported to China on the European Commission's Non-Food Rapid Alert System (RAPEX), and adopted the mandatory withdrawal of markets and recalls in Europe. The measures involved include LED flashlights, light bulbs, desk lamps and floodlights. Related information is as follows: 1, LED flashlight The notified country is Hungary, and the product is a YANUO brand glare flashlight. The product style is YN-999, the model is JG-999, the barcode is 6 914051 102801, and the OECD Portal Category is in the OECD Portal Category. The attribution is 78000000 (electrical appliances). The product is a rechargeable flashlight that can be charged in a storage box. The power cord of this product has insufficient cross section, which may cause the cable to overheat and cause a fire. The plug size is too small and the user is at risk of electric shock when plugging in. The end of the power cord is not adequately protected by the pull and sway, and the live wire is easily exposed. During the charging process, the protective cover of the LED can be easily removed, posing a risk of electric shock. This product does not comply with the requirements of the European Low Voltage Directive and the relevant requirements of the European standard EN60598. 2, LED bulb The notified country of this case is Germany, the notified product is LED bulb, the product style is R7S-10 watt 980 lumens, the serial number is R7S-5630-3016*76mm, the barcode is 4260355563121 (not dimmable), 4260355563113 (dimmable), The OECD Portal Category is attributed to 78 million (electrical appliances). The ballast of this product is not fixed, can be shaken in the housing, its power cord will be detached during transportation, which will cause the risk of leakage of easily accessible parts, and there is also a report about electric shock. The product also contains too much lead, which is harmful to the environment. This product does not comply with the requirements of the EU Low Voltage Directive and the RoHS Directive. 3, LED table lamp The notified country is France, and the notified product is a rose lamp with a cylindrical lampshade under the trademark LINHAI JUNIS LIGHTING CO., model number is JY-39-1–484120, in the OECD Portal Category. The attribution is 78000000 (electrical appliances). The metal parts of the lampshade are sharp on the edges and may cause scratches in consumption. This product also does not comply with the requirements of the European Low Voltage Directive and the relevant European standard EN60598. The notified country is Latvia, and the notified product is LED floodlight, the trademark is ProLight, the product model is POT-151, the barcode is 2770030088993, and it belongs to 78000000 (electrical appliance) in the OECD Portal Category. This product does not meet the working environment temperature requirements. If it is used improperly, there is a risk of fire. At the same time, the mechanical strength of the product is not enough, and the charged part is easy to be exposed. This product does not comply with the requirements of the European Low Voltage Directive and the relevant European standard EN60598. In July 2015, the European Union established the European Product Safety Enforcement Forum (PROSAFE), which will launch a two-year joint regulation of consumer goods. The joint market surveillance initiative targets five categories of offending products, including lighting products such as LEDs and fluorescent lights, sounding toys, fireworks, power tools, and safety fences. For more than five months, the authorities have issued more than 100 notifications on lighting products such as LEDs and fluorescent lamps through the Rapid Alert System for Non-Food Hazardous Products (RAPEX). Here, the China Lighting Association recommends that domestic production and export companies pay attention to product quality.
Smd3014 Led Strip Light bar is a size 3.0 (length) × 1.4 (width) × 0.8 (thickness) mm LED lamp. Features: high brightness, stable performance, low-light failure, scattering angle, SMD3014 LED Strip Light energy saving and environmental protection advantages: The company has many advanced LED automated packaging equipment and professional technology, high productivity, quality assurance, price concessions.
SMD3014 LED Strip Light Storage
(1) The LED can be stored for one year at a temperature not exceeding 40 ° C and humidity not exceeding 90% RH before unpacking. When storing, it is recommended to use a moisture-proof bag with a desiccant.
(2)SMD3014 Led Strip Light LED must be stored in the package at <= 40 ℃ & <= 60% RH Relative humidity, we strongly recommend that you complete the process from opening the packaging to complete the patch within a week to complete. If there are unused remaining LEDs, we recommend that you re-use the moisture-proofing agent at the factory and re-seal smd3014 led strip light. If the desiccant expires, place the LED in a 70 ° C oven for 12 hours. The LED electrode and the lead frame are made of silver-plated copper alloy.
The silver-plated layer is damaged by the surrounding environment. Please keep the LED away from the environment where the silver layer of the LED electrode is corroded. Reducing smd3014 led strip light welding capacity and optical parameters. Avoid using LEDs in environments where the temperature is rapidly changing, especially in high-humidity environments where condensation can occur.
SMD3014 LED Strip Light Led Strip With Dc Connector,Bar Led Strip,Smd3014 Led Strip Light,12V Led Strip Shenzhen Mingxue Optoelectronics CO.,Ltd , https://www.led-lamp-china.com
