Zhihai Factory Sale 900W led flood light for Industrial Architecture
and Marine application

   3-light module            2-light module              1-light module


Features:
1. lnnovative flood light with dedlcated optfcsthatensure maximum optlcal efficiency and enable  aαurate        light distribution with a minimum of spill light.
2. Light can bedimmed/controlled according to actual need, significantly reducing energy costs up to                65% in area lighting applications.
3. Minimized maintenance costs thanks to long-lasting LEDs and the luminaire's thermal management            system, as well as its rehable iP66 driver box.Precisely controlled light distribution-symmetrical and            asymmetrical-limitslight pollution.
4. Fully controllable when combined with the latest llghtlng control systems to enablemaximum energy            savings.
5. Unique quality of light with flicke free operation suitable for HDTV broadcasting and Super Slow Motion.




Specification:

Product Description


 

 

Product Dimensions

 

Application

Outdoor and indoor sports arenas and stadiums

Indoor sports halls (aquatic centers, velodromes, ice hockey arenas, etc.)

Multipurpose arenas


Installation
Important: antsafeguards
When using electricaI equipment, basic safety precautionsshould always be followed including the following:
1.To avoid the possibility of electrical shock. tum off power supply before installation or servicing.      Installation and servicing should be performed by qualified personnel-Read and follow all safety    instructions
2. When closing cover of fixture, be sure all wires are inside housing to avoid pinching wires.
3. Product must be installed in accordance with your local electrical code.
   If you are not familiar with these codes and requiremens, consult a qualified electrician.
4. Do not change the structure or any commponents of the fixture to ensure safety.

Company Information
1. Everlite is professional in LED outdoor lighting and LED Lights Research , Development and production      for 8 years.
2. We have very experienced LED R&D team, with 5 knowledgeable engineers, helping our customers            customerized products, making thermal simulation, desining light distribution, and supplying OEM die-          casting, as well as CKD/SKD.
3. We can help clienst in modifying module design and developing module .
4. We could supply technical support , including project lighting designing( indoor/outdoor) and optical            simulation.
5. We have Europea Union appearance patent , as well as versatility patent.
6. All of our LED street lights are approved by TUV-GS certificate.

Main Products


 

FAQ

   Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
 

   Q2. What about the delivery time?
A: Sample needs 7-15 days, mass production needs 35-40 days according to order quantity.

   Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available.

 

   Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea                   shipping also optional.

   Q5. How to proceed an order for led light?
A: Firstly let us know your requirements or application.
    Secondly We quote according to your requirements or our suggestions.
    Thirdly customer confirms the samples and places deposit for formal order.
    Fourthly We arrange the production.

   Q6. Is it ok to print my logo on led light product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our                   sample.

   Q7: Do you offer guarantee for the products?
A: Yes, we offer 3-5 years warranty to our products.

 

Welcome to contact us !

Wire To Board Connectors

1.ANTENK Wire to Board connectors are avialable in different terminations and sizes intended for use on a variety of applications. These connectors provide power and signal with different body styles, termination options, and centerlines. To find the wire to board set required, click on the appropriate sub section below.

2.Our products are widely used in electronic equipments,such as monitors ,electronic instruments,computer motherboards,program-controlled switchboards,LED,digital cameras,MP4 players,a variety of removable storage disks,cordless telephones,walkie-talkies,mobile phones,digital home appliances and electronic toys,high-speed train,aviation,communication station,Military and so on

Antenk Wire To Board Connectors Ranges:

Power Wire to Board
IDC Wire to Board
Locking Wire to Board
Latching Wire to Board
Fine Pitch Wire to Board

Wire to Board Connectors Information
Description
Wire-to-board connectors are used to interconnect printed circuit boards (PCBs) by using connectors attached to wires.

Specifications
Specifications for a wire to board connector include the following.
Wire-entry angle - There are three wire-entry angle styles: vertical, right-angle, and bottom-entry.
Wire size - Wire size is usually measured in American wire gauge (AWG), a standard for non-ferrous wire conductor sizes. The term "gauge" refers to the wire`s diameter. The higher the gauge number, the smaller the diameter and the thinner the wire.
Circuits or positions - With wire to board connectors, the number of circuits or positions may range from 1 to 120.
Pitch or center spacing - Pitch or center spacing is measured in millimeters (mm) or inches.
Lock to mating style - There are three basic lock-to-mating styles: positive, friction, and friction ramp.
Maximum current - The maximum current or current-carrying capacity is measured in amperes (A) and ranges from 1.0 A to 50. A.

Termination Methods
Crimp is the physical compression of a contact wire around a conductor to make an electrical and mechanical connection. Insulation displacement connectors (IDC) slice through the cable insulation to make a connection. Choices for termination method also include cage clamp, screw, tabs, and solder cups.

PCB Mounting Styles
With wire to board connectors, there are four choices for PCB mounting.
Through-hole technology (THT) mounts components on a PCB by inserting component leads through holes in the board and then soldering the leads in place on the opposite side of the board.
Surface mount technology (SMT) adds components to a PCB by soldering component leads or terminals to the top surface of the board. SMT components have a flat surface that is soldered to a flat pad on the face of the PCB. Typically, the PCB pad is coated with a paste-like formulation of solder and flux.
Press-fit and compression-style Board To Board Connectors are also commonly available.Wire to Board Connectors Information

Standards
Wire-to-board connectors carry approvals from various national and international organizations. In North America, they often bear marks from Underwriters Laboratories (UL) and/or the Canadian Standards Association (CSA).
A wire to board connector for the European marketplace should comply with the Restriction of Hazardous Substances (RoHS) and Waste Electrical and Electronic Equipment (WEEE) directives from the European Union (EU). Wire-to-board connectors that comply with other requirements are also available.
BS 9526 N0001 - Specification for multi-contact edge socket electrical connectors.

Wire To Board Connectors,Wire Harness,Pcb Wire To Board Connector,Pin Wire To Board Connector,IDC Wire to Board,Locking Wire to Board,Latching Wire to Board,Fine Pitch Wire to Board

ShenZhen Antenk Electronics Co,Ltd , https://www.antenkconn.com