Product Parameters
Description: Smart CCT LED Bulb with APP
Introduction
Smart CCT Bulb use energy-saving, high-quality LED lamp beads, stable light source without stroboscopic, voltage is 10W, lumen is 805LM, can be used for 20,000 hours. The color temperature and brightness of light can be adjusted, users can choose different color temperatures according to different scenes between 3000K-6500K. 3000-4000K is warm white light, light is soft and suitable for resting; 5500K can simulate natural light, color temperature is the same as dayligh at noont; 6000-6500K is cool white light, the light is bright, attention-focused, suitable for work.
The App are developed on the most advanced Bluetooth Mesh technology. [LinkupHome" App can be downloaded in the App store or Google Player, then you can control our product without any complicate steps. The App is stable, easy control and multifunctional.
The advantages of Bluetooth Mesh are fast connect, low power consumption, no password required and Ad-Hoc Network. No need WIFI and hubs, as long as you have a Bluetooth-enabled smart phone, you can experience the smart light. When you install several smart bulbs, the self-organizing network function can make the signals free connect, break the limitation of distance.
Smart CCT Bulb Smart CCT Bulb,Smart CCT Bulb with APP,CCT Lighting,Compliant Smart CCT Bulb Ningbo Homey Photoelectric Tech. Co., Ltd , http://www.linkuphome.com
introduction:
Squared XR101 magnetic resistance type speed sensor is high cost performance, a wide range of general rotating speed sensor is used to guide magnetic speed measurement of the object, using non-contact measurement methods.Inside the sensor is composed of magnetic steel, soft magnetic coil and armature.The basic measuring principle is (lines) issued by the magnet, magnetic field through the armature and coil, when there is a magnetic object magnetic flux change in the near or far away from the coil, induction coil of electromotive force, and coil inside gear shaft speed), induction and speed is proportional to the frequency signal;If is involute gear, the induced voltage is a sine wave.Is proportional to the size and speed signal amplitude of the probe end and tip clearance is inversely proportional to the size.
L performance characteristics
1. The non-contact measurement, do not contact with moving parts are being tested, no wear and tear
2. Using magnetoelectric induction principle, without external power supply, the output signal is big, do not need to enlarge, anti-interference performance is good
3. The integrated design, simple structure and reliable, has the very high resistance to vibration and impact resistant properties
4. To adapt to the working environment temperature range is wide, suitable for harsh industrial environments, such as smoke, oil and gas and moisture environment
Ø electrical indicators:
250 to 550 Ω squared straight flow resistance: (25 ºC)
Squared work temperature: - 30 to + 100 ºC
Ø physical indicators:
Squared weight: about 120 g
Squared vibration-proof move: 20 g
Squared thread specification: M16 x 1
Squared installation clearance: 0.5-1.0 mm, it is recommended that the 0.8 mm
Squared material quality: 304 stainless steel
Squared gear material: gear material permeability strong metal materials should be adopted.
Squared tooth profile: involute tooth profile is the most appropriate tooth profile.With big modulus gear or with other tooth will produce a great waveform distortion, which will interfere with accurate measurement.If the main shaft axial movement, the attention should be paid to the center of the pole should be in the center of the gear.
Module of gear: 2 to 4 tooth width b: more than 5 mm.
Squared work temperature: - 10 to + 100 ºC
Ø order guidelines:
Squared XR101 - AXX - BXX - CXX - DXX
The sensor length AXX: 01-60 mm
02-80 - mm
03-120 - mm
04 - special specifications (maximum length is 300 mm)
Thread specification BXX: 01 - M16 x 1
Special specifications.
Cable length CXX: increasing when placing order, to 1 m, for example: 010 = 1.0 m,
The default 2 m
Joint options DXX: 0 1 - lead directly
0 2 - aviation plug
Â
Bluetooth: CSR Bluetooth Mesh
Control Qty: 1-48 pcs
Control distance: 20m
Product dimension: Dia60mm * H130mm
Material: PC & Ceramic & Aluminum & Nylon
Working Voltage: 100-240V
Frequency: 50/60Hz
Color Temperature: 3000-6500K
LED Power: 10W (Max 805 LM)
Life Span: 20000H
Base Type: E27/E26/B22 available
Warranty: 2 Years
Color box size: 16*6.6*6.6cm
G.W. of Unit: 0.21kg
N.W. of Unit: 0.17kg
Certification: CE(EMC,RED), ROHS,FCC
