Seven factors in the price difference of LED lamps

The LED lighting industry is developing rapidly, and all kinds of lamps are in full bloom, and the price difference is quite obvious. There are many manufacturers of LED and LED lighting . Different manufacturers use different quality LEDs, which are the important reasons for LED lamps. Due to the increasingly fierce price war, the products with almost the same appearance, structure and function have a price difference of 2-3 times. Many users have been stunned for a while, and they do not know where the price difference comes from. Generally, LED lighting manufacturers that do not produce LED lighting tubes are generally not produced. It's hard to distinguish, let alone consumers.

Therefore, it is better to choose a LED lighting factory that has a good LED production source or a complete LED testing equipment, so that the bought LED lighting products will be more secure.

Let's see what factors are causing the price difference of LED lamps:

1, brightness

The brightness of the LEDs is different and the price is different.

2, antistatic ability

LEDs with strong antistatic properties have a long life and are therefore expensive. LEDs with an antistatic greater than 700V are usually used for LED lighting.

3, wavelength

LEDs with the same wavelength have the same color. If the color is the same, the price is high. It is difficult for manufacturers without LED spectrophotometers to produce pure color products.

4, leakage current

The LED is a unidirectional conductive illuminator. If there is a reverse current, it is called a leakage current, and the LED with a large leakage current has a short life and a low price.

5, the angle of illumination

LEDs with different uses have different illumination angles. Special lighting angle, the price is higher. Such as the full diffusing angle, the price is higher.

6, life

The key to different qualities is life, and life is determined by light decay. Low light decay, long life, long life and high price.

7, LED chip

The illuminator of the LED is a chip, and the price of the chip varies greatly. The chips in Japan and the United States are more expensive, and the price of LED chips from Taiwanese and Chinese manufacturers is lower than that of Japan and the United States.

XLPE Insulated PVC sheath Alloy Cable is kind of cable, in which the rare earth high compressed aluminium alloy is used as conductor, and PVC is used as Jacket wound around. The insulation adopts XLPE material, featuring with fire & moisture resistance. The whole structure is designed and manufactured elaborately based on advanced international technology and  equipment. It has completely independent intellectual property rights and removed the defects of aluminum cable systematically. It applies to both dry and moist places at the temperature of 90ºC and under.  This cable presents excellent mechanical performance.


Standard: GA306                        Jacket: PVC

Conductor: aluminum alloy              Cores: single core or multicores

Insulation: XLPE                        Feature: flame retarded

Rated voltage: 0.6/1KV, 8.7/10KV, 8.7/15KV, 26/35KV

high compressed aluminum alloy


  • Conductor fatigue resistance
  • Light weight
  • Easy installation
  • Long life span
  • Flame retarded
  • Decent mechanical strength
  • Chemical & acid resistance
  • Creep resistance
  • Impact resistance
  • Easy to bend
  • Fire resistant
  • Zero halogen & low smoke
  • Corrosion & abrasion resistant
  • ...

XLPE Insulated PVC sheath Alloy Cable


  • For civil use
  • For commercial use
  • For industrial use
  • Schools
  • Large venus
  • And many more...

Welcome to visit our factory to learn more about us. If you have any questions, please feel free to contact us. 

XLPE Insulated PVC Sheathed Alloy Cable

XLPE Insulated PVC Sheathed Alloy Cable,XLPE Insulated Al Alloy Cables,Aluminum Alloy XLPE Cables,Al Alloy Armoured XLPE Cables

Fujian Lien Technology Co.,Ltd ,